Xporter on Demand: Authorise Data Sharing
Summary
Instructions to authorise a 3rd party application to receive the required data from your MIS via Xporter on Demand.
Answer
Scope
- Once your MIS is connected to Xporter on Demand, no data will be shared with any 3rd party applications until you have authorised it to do so. Here is how to authorise an application.
Instructions
1. Log into the School Portal. View our guide if you are unsure of your details: How To: Reset your XoD Password.
2. On the Homepage, go to the Data Sharing tile > click Review pending invites.
3. On the next page, click on the application you wish to authorise > click Begin Authorisation from the right panel.
4. Confirm that you have the authority to share your school’s data with the application.
- Note: If you choose No, you will be able to enter the details of someone who does have authority which will email that person.
5. Next you can review the Data Areas required by the application, which are provided by your application provider when the invitation is first sent.
- Note: You also have an opportunity to change the MIS to which XoD should be connecting.
6. The next step shows the selected Data Sharing Mode and whether the feed is paused for this application. This can be changed later from your School Portal if required.
7. The final step is to agree to the Sharing Declaration. All 3 buttons must be selected in order to click Authorise Sharing and proceed.
- Note: If you do not have the authority to agree to the declaration, please go back to Step 4 and select No to pass this authorisation on to the correct person.
8. Authorisation is now complete. You can choose to log into the School Portal or your application’s website if necessary.
- Note: If the connection to your MIS is not yet set up, you will have the opportunity to either complete this or book an installation slot. Read our guide for further instructions: How To: Setup XoD.
